[RMCProfile-users] Configuring BVS in .dat file

[helen.playford at stfc.ac.uk]

Hi Dylan,

Yes, the version of the manual that comes with the program download is the most up to date - the manual supporting code version 6.5.2 is quite different from the one from 6.5.0, as you have found! 

The "manuals" page on the website is clearly out of date, which I had not realised, so thank you for bringing that to my attention.

Best wishes,
Helen

-----Original Message-----
From: rmcprofile-users [mailto:rmcprofile-users-bounces at rmcprofile.org] On Behalf Of Dylan Fast
Sent: 25 August 2015 21:33
To: rmcprofile-users at rmcprofile.org
Subject: Re: [RMCProfile-users] Configuring BVS in .dat file

Dear Helen,

Thank you very much for your response. Can I ask if there is a newer copy of the manual that is not currently available on the website? For reference I am getting the version 6 manual from the main rmcprofile.org/manuals page (the first page says code version 6.5.0). In this copy both sections 4.8 and 5.5 contain only placeholder text stating that the segment needs to be edited. I do always try to exhaust the manual before reaching out for help from the mailing list but in this case I could not find any relevant documentation. I apologize if there have been any obvious oversights on my part.

Thanks again!

~Dylan Fast

On Tue, Aug 25, 2015 at 3:16 AM, <helen.playford at stfc.ac.uk> wrote:

> Hi Dylan & others,
>
> Thanks for getting in touch and sharing the solution to the problem 
> with your .bvs file.
>
> I just wanted to add for future reference (and in case anyone else is 
> having trouble with this part of the program) that the use of the BVS 
> keyword is detailed in the current version of the RMCProfile manual: 
> please see sections 4.8 and 5.5.
>
> Best wishes,
> Helen
>
> -----Original Message-----
> From: rmcprofile-users 
> [mailto:rmcprofile-users-bounces at rmcprofile.org]
> On Behalf Of Dylan Fast
> Sent: 19 August 2015 00:07
> To: rmcprofile-users at rmcprofile.org
> Subject: Re: [RMCProfile-users] Configuring BVS in .dat file
>
> Hello,
>
> After further investigation I realized my mistake with the .bvs file. 
> It turns out that having a tab instead of a space between the element 
> and the oxidation state for the top lines was causing RMCprofile to 
> not read the file properly.
>
> Please feel free to disregard the above email requesting help. If you 
> would like to use this to assist other users that may run into a 
> similar problem please feel free. Thanks!
>
> Best Regards,
>
> Dylan Fast
>
>
> _______________________________________________
> rmcprofile-users mailing list
> rmcprofile-users at rmcprofile.org
> http://lists.rmcprofile.org/mailman/listinfo/rmcprofile-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rmcprofile.org/pipermail/rmcprofile-users/attachments/20150825/a0f9eff8/attachment.html>
_______________________________________________
rmcprofile-users mailing list
rmcprofile-users at rmcprofile.org
http://lists.rmcprofile.org/mailman/listinfo/rmcprofile-users