[RMCProfile-users] get_gsas_bragg

Tue Dec 10 18:44:19 GMT 2019

Hi Matt,

NB: the old gsas will not run on the most recent version of OSX. Apple 
no longer provides the 32-bit libraries that gsas requires & gsas can 
not be compiled successfully in 64-bits because it uses 32-bit pointers 
in genles.

Bob

On 12/10/2019 4:29 PM, Tucker, Matthew G. wrote:
> Hi Victor,
>
> Please can you send me a file list of the directory you are working in with the ‘ls -l’ command.
>
> Also please can you run data2config on the .TBL file you have produce and send me a copy of its output.
>
> The error on the mac looks like it is try to run gsas but you don’t have a copy in /Application/gsas/exe
>
> On windows it looks like there is a problem with the .hst file and finding the bragg data you should have written to the .LST file in stage 5 of the Appendix A instructions.  Unfortunately the order you do things does matter, so if gsas has been run since your ran hstdmp you will need to run it again and to be safe it is probably best to move the existing .LST file or delete it if you don’t need it.
>
> It is better to use data2config if you can prepare your files ahead of time, if not get_gsas_bragg can run gsas for you but it is older and doesn’t always work depending on how the files are setup.
>
> Best wishes,
> Matt
>
> From: Changhao Zhao <czhao1021 at outlook.com>
> Date: Tuesday, December 10, 2019 at 8:59 AM
> To: "Poree Victor Alexis (PSI)" <victor.poree at psi.ch>, "rmcprofile-users at shadow.nd.rl.ac.uk" <rmcprofile-users at shadow.nd.rl.ac.uk>
> Subject: Re: [RMCProfile-users] get_gsas_bragg
>
> Hi Victor,
>
> Actually, I have encountered the same problem as yours. An alternative solution is to edit the .bragg file manually. You can refer to the format of the .bragg file in the RMCProfile manual. Then extract each data point of your XRD pattern, and output a .bragg file containing all the data points (this can be easily done by MATLAB). Hope this helps you.
>
> Best,
> Changhao
> ________________________________
> From: rmcprofile-users <rmcprofile-users-bounces at shadow.nd.rl.ac.uk> on behalf of Poree Victor Alexis (PSI) <victor.poree at psi.ch>
> Sent: Tuesday, December 10, 2019 1:05 PM
> To: rmcprofile-users at shadow.nd.rl.ac.uk <rmcprofile-users at shadow.nd.rl.ac.uk>
> Subject: Re: [RMCProfile-users] get_gsas_bragg
>
> Hello,
>
> That's what I used to get the .back, .inst etc. But it did not generate a .bragg.
>
> Best,
>
> Victor
>
> On 10.12.19, 12:53, "rmcprofile-users on behalf of Martin Dove" <rmcprofile-users-bounces at shadow.nd.rl.ac.uk on behalf of martin.dove at qmul.ac.uk> wrote:
>
>      Why don’t you use data2config to do it?
>
>      Best wishes
>
>      Martin
>
>      > On 5 Dec 2019, at 16:47, Poree Victor Alexis (PSI) <victor.poree at psi.ch> wrote:
>      >
>      > Dear all,
>      >
>      > I am setting up the starting files to begin my RMCProfile simulation.
>      >
>      > I have used GSAS to fit the data (obtained on GEM) under windows (the Mac version is not cooperating). I have generated the .back, .inst etc using the RMCProfile tools. However I cannot obtain the .bragg. I tried using the get_gsas_bragg command but I get the following errors in both Mac and windows (see attachment).
>      >
>      > What should I do to solve this and get starting with the RMC?
>      >
>      > Best regards,
>      >
>      > Victor Porée
>      > ----------------------------
>      > Laboratory for Neutron Scattering and Imaging (LNS)
>      > Paul Scherrer Institut
>      > WHGA 142
>      > Forschungsstrasse 111
>      > 5232 Villligen PSI
>      > Phone: +41 56 310 36 23
>      > victor.poree at psi.ch<mailto:victor.poree at psi.ch>
>      >
>      >
>      > -------------- next part --------------
>      > An HTML attachment was scrubbed...
>      > URL: <https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.rmcprofile.org%2Fpipermail%2Frmcprofile-users%2Fattachments%2F20191205%2F59614cf3%2Fattachment.htm&data=02%7C01%7C%7Ccc6852120c3646dcdeac08d77d5398b2%7C569df091b01340e386eebd9cb9e25814%7C0%7C1%7C637115670313158045&sdata=Itr5bNiOIxvNEelGXmRk0sDITTb5nTFvskoF6xVdPfk%3D&reserved=0>
>      > -------------- next part --------------
>      > A non-text attachment was scrubbed...
>      > Name: Screenshot 2019-11-12 at 15.17.28.png
>      > Type: image/png
>      > Size: 120710 bytes
>      > Desc: Screenshot 2019-11-12 at 15.17.28.png
>      > URL: <https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.rmcprofile.org%2Fpipermail%2Frmcprofile-users%2Fattachments%2F20191205%2F59614cf3%2Fattachment.png&data=02%7C01%7C%7Ccc6852120c3646dcdeac08d77d5398b2%7C569df091b01340e386eebd9cb9e25814%7C0%7C1%7C637115670313168037&sdata=eg9oBt0pyN7wL9KS8BA1yeYgicq4x8nxEV4XM7%2BVZyg%3D&reserved=0>
>      > -------------- next part --------------
>      > A non-text attachment was scrubbed...
>      > Name: Screenshot 2019-11-12 at 15.18.03.png
>      > Type: image/png
>      > Size: 85634 bytes
>      > Desc: Screenshot 2019-11-12 at 15.18.03.png
>      > URL: <https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.rmcprofile.org%2Fpipermail%2Frmcprofile-users%2Fattachments%2F20191205%2F59614cf3%2Fattachment-0001.png&data=02%7C01%7C%7Ccc6852120c3646dcdeac08d77d5398b2%7C569df091b01340e386eebd9cb9e25814%7C0%7C1%7C637115670313168037&sdata=iVEMvFI11P9LlE6St0GvanbfCZJ9M2YfodSaGkkZOTE%3D&reserved=0>
>      > _______________________________________________
>      > rmcprofile-users mailing list
>      > rmcprofile-users at rmcprofile.org
>      > https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.rmcprofile.org%2Fmailman%2Flistinfo%2Frmcprofile-users&data=02%7C01%7C%7Ccc6852120c3646dcdeac08d77d5398b2%7C569df091b01340e386eebd9cb9e25814%7C0%7C1%7C637115670313168037&sdata=Hy52EaGAK04sZPasBjJV%2Fxn0DnJUUoyBi%2F%2FGfh3IRi0%3D&reserved=0
>
>
>      _______________________________________________
>      rmcprofile-users mailing list
>      rmcprofile-users at rmcprofile.org
>      http://lists.rmcprofile.org/mailman/listinfo/rmcprofile-users
>
>
>
> _______________________________________________
> rmcprofile-users mailing list
> rmcprofile-users at rmcprofile.org
> http://lists.rmcprofile.org/mailman/listinfo/rmcprofile-users
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.rmcprofile.org/pipermail/rmcprofile-users/attachments/20191210/f098140d/attachment.htm>
> _______________________________________________
> rmcprofile-users mailing list
> rmcprofile-users at rmcprofile.org
> http://lists.rmcprofile.org/mailman/listinfo/rmcprofile-users