[RMCProfile-users] Help with data2config

Wed Mar 22 09:21:54 GMT 2017

Hi Mudasir,

Just a quick reply to say that the mailing list strips attachments, so could you please send the files to me at helen.playford at stfc.ac.uk and I will then be able to have a look.

Thanks!
Helen

-----Original Message-----
From: rmcprofile-users [mailto:rmcprofile-users-bounces at rmcprofile.org] On Behalf Of Mudasir Ahmad Yatoo
Sent: 22 March 2017 07:18
To: rmcprofile-users at rmcprofile.org
Subject: Re: [RMCProfile-users] Help with data2config

Dear Martin and Helen,

Thank you for your valuable comments.

Here is the command;
*data2config -noannotate -rmc6f -order [CE NB O] -supercell [4 4 4]
CENBO425_243.TBL*
After going through the procedure Helen mentioned, I am able to produce all four types of cells but the brag profile and gsas background files produced are differently numbered. I further produced .cif file by data2config, but the cell parameters are way off from the actual ones. I have attached all the files produced here and also the .cif files. Please have a look.

Many thanks.

Regards,
Mudasir

On 14 March 2017 at 19:44, Martin Dove <martin.dove at qmul.ac.uk> wrote:

> Just to explain WHY Helen’s advice here is essential.
>
> GSAS has output designed for the days of line printers with continuous 
> paper feeds and perforations between pages. We needed to extract the 
> Bragg histogram from the GSAS output rather than from the input for 
> reasons I don’t recall but are to do with the fact that what comes out 
> of GSAS is what we want, and what goes into GSAS is not.
>
> But because the output format from GSAS is horrible, there is only so 
> much programming of the parsing of the data one can do. Moreover, GSAS 
> simply adds things to files rather than create new files, so if you do 
> not delete the .LST file before you do this task then data2config will 
> only read the first part of the file and not skip over the stuff you 
> don’t want. I also delete the .TLB file first but maybe I am being too cautious.
>
> Best wishes
>
> Martin
>
>
> > On 14 Mar 2017, at 10:32, helen.playford at stfc.ac.uk wrote:
> >
> > Dear Mudasir,
> >
> > The bit in the tutorial about the "1" hasn't been true for a while, 
> > so
> don't worry about that (note to self: update that bit of the tutorial).
> >
> > Could you please follow this procedure and let us know what happens:
> > 1. In GSAS/EXPGUI, run "pubtable" (under Import/Export > pubtable) 
> > 2. Delete the .LST file from your working folder 3. In GSAS/EXPGUI, 
> > run "hstdmp" (under Results > hstdmp) 4. Run data2config
> >
> > If that doesn't help, can you please write here the command(s) you 
> > are
> giving data2config (you can use the "mark" feature in the command 
> prompt to copy the text), and we can help figure out what's going on?
> >
> > Best wishes,
> > Helen
> >
> > -----Original Message-----
> > From: rmcprofile-users 
> > [mailto:rmcprofile-users-bounces at rmcprofile.org]
> On Behalf Of Mudasir Ahmad Yatoo
> > Sent: 14 March 2017 10:23
> > To: rmcprofile-users at rmcprofile.org
> > Subject: Re: [RMCProfile-users] Help with data2config
> >
> > Dear Martin and Yuanpeng,
> >
> > Thank you.
> >
> > I have tried 4 x 4 x 4 and 10 x 10 10 already. It isn't working! In 
> > fact
> what the manual says is that once data2config is run, the program 
> should write '1' and end but when I am running it for even the 
> tutorial example of SF6, it isn't writing '1' but it does produce the 
> required files. However, when I do the same with my material, 
> CeNbO4.25, neither is program writing '1'  nor is it producing all 
> files. It however produces .inst and .rmc6f files. I even tried to 
> download the program anew, but it isn't behaving properly.
> >
> >
> > Regards,
> > Mudasir
> >
> > On 12 March 2017 at 15:22, Yuanpeng Zhang <zyroc1990 at gmail.com> wrote:
> >
> >> When asked for the supercell multipliers, could you just input 
> >> something like '8 8 8' (which means you want a 8x8x8 supercell as 
> >> the
> simulation box)?
> >>
> >> Cheers,
> >> yuanpeng
> >>
> >>
> >> Dr. Yuanpeng Zhang
> >> Postdoc In Advanced Diffraction Group
> >>
> >> Spallation Neutron Source
> >> Oak Ridge National Laboratory
> >> Oak Ridge, TN 37830
> >>
> >> Tel: +1 865-335-4818
> >>
> >> zyroc1990 at gmail.com
> >> http://dcvps.aipeng1990.com
> >> http://dcvps.aipeng1990.com/home
> >>
> >> On 09/03/17 11:55, Mudasir Ahmad Yatoo wrote:
> >>
> >>> Hi all,
> >>>
> >>> I am playing around RMC but am unable to produce the starting 
> >>> files from GSAS data using data2config. The program is either not 
> >>> running or asking me to input the supercell multipliers, which I'm 
> >>> not able to comprehend fully.
> >>> Could someone please help me out?
> >>>
> >>> Thank you.
> >>>
> >>>
> >>> Regards,
> >>> Mudas
> >>> ir
> >>> -------------- next part -------------- An HTML attachment was 
> >>> scrubbed...
> >>> URL: <http://lists.rmcprofile.org/pipermail/rmcprofile-users/atta
> >>> chments/20170309/d2b4f750/attachment.html>
> >>> _______________________________________________
> >>> rmcprofile-users mailing list
> >>> rmcprofile-users at rmcprofile.org
> >>> http://lists.rmcprofile.org/mailman/listinfo/rmcprofile-users
> >>>
> >>
> >> _______________________________________________
> >> rmcprofile-users mailing list
> >> rmcprofile-users at rmcprofile.org
> >> http://lists.rmcprofile.org/mailman/listinfo/rmcprofile-users
> >>
> > -------------- next part -------------- An HTML attachment was 
> > scrubbed...
> > URL: <http://lists.rmcprofile.org/pipermail/rmcprofile-users/atta
> chments/20170314/03e1b7ff/attachment.html>
> > _______________________________________________
> > rmcprofile-users mailing list
> > rmcprofile-users at rmcprofile.org
> > http://lists.rmcprofile.org/mailman/listinfo/rmcprofile-users
> >
> > _______________________________________________
> > rmcprofile-users mailing list
> > rmcprofile-users at rmcprofile.org
> > http://lists.rmcprofile.org/mailman/listinfo/rmcprofile-users
>
>
> _______________________________________________
> rmcprofile-users mailing list
> rmcprofile-users at rmcprofile.org
> http://lists.rmcprofile.org/mailman/listinfo/rmcprofile-users
>

  <https://mailtrack.io/> Sent with Mailtrack <https://mailtrack.io/install?source=signature&lang=en&referral=muda.amu@gmail.com&idSignature=22>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.rmcprofile.org/pipermail/rmcprofile-users/attachments/20170322/33b9611a/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: CENBO425_243.inst
Type: application/octet-stream
Size: 254 bytes
Desc: not available
URL: <http://lists.rmcprofile.org/pipermail/rmcprofile-users/attachments/20170322/33b9611a/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: CENBO425_243_1.back
Type: application/octet-stream
Size: 472 bytes
Desc: not available
URL: <http://lists.rmcprofile.org/pipermail/rmcprofile-users/attachments/20170322/33b9611a/attachment-0001.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: CENBO425_243_4.bragg
Type: application/octet-stream
Size: 71316 bytes
Desc: not available
URL: <http://lists.rmcprofile.org/pipermail/rmcprofile-users/attachments/20170322/33b9611a/attachment-0002.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: CENBO425_243.rmc6f
Type: application/octet-stream
Size: 864684 bytes
Desc: not available
URL: <http://lists.rmcprofile.org/pipermail/rmcprofile-users/attachments/20170322/33b9611a/attachment-0003.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: data2configCIF.cif
Type: application/octet-stream
Size: 545269 bytes
Desc: not available
URL: <http://lists.rmcprofile.org/pipermail/rmcprofile-users/attachments/20170322/33b9611a/attachment-0004.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: gsasCIF.cif
Type: application/octet-stream
Size: 539162 bytes
Desc: not available
URL: <http://lists.rmcprofile.org/pipermail/rmcprofile-users/attachments/20170322/33b9611a/attachment-0005.obj>
_______________________________________________
rmcprofile-users mailing list
rmcprofile-users at rmcprofile.org
http://lists.rmcprofile.org/mailman/listinfo/rmcprofile-users